6GB-G máy mài kính 3 trục dạng xung
Thông số kỹ thuật:
| Thông số kỹ thuật | ||
|---|---|---|
| Model | Item | 6GB-G |
| Axis control | Standard. Axis | 4 |
| Max. Axis (Optional) | – | |
| Max. Spindle | 2 | |
| Axis group + PLC axis group | 1 | |
| Max. Simultaneous Axis Control | Single axis group | 4 |
| Hardware | Servo control | Pulse |
| Standard I/O | 32/32 | |
| Optional I/O | – | |
| DA | 2 | |
| Monitor (Inch) | 8″ | |
| DiskC | Flash 256MB | |
| DiskA | Flash 256MB | |
| Front interface | CF Card | – |
| USB | 2 | |
| Rear interface | RJ-45 | O |
| VGA | – | |
| RS-232 | – | |
| RS-422 | – | |
| RS-485 | O | |
| USB | – | |
| PS/2 | – | |
| KB | O | |
| HK | O | |
| 5V | O | |
| SRI | – | |
| Normal/HPCC | BPT about 200(CE) | |
| Standard features | 1. G5.1 2. Simultaneous tapping 3. Fast transmission and fast attack 4. Tapping and rapid retraction 5. Multi-spindle simultaneous tapping 6. Axis exchange function 7. Overlapping 9. Single axis group five-axis simultaneous motion function | |
| Option | Option-4 Enable Plugin Function | |
| Option-11 High Precision Contour Control (HPCC) | ||
| Option-12 Rotation Tool Center Point (RTCP) | ||
| Option-13 Feature Coordinate System | ||
| Option-14 Parameter learning function | ||
| Option-15 Tapping Learning | ||
| Option-16Syntec Vision | Δ | |
| Option-17 Commercial Vision Software | Δ | |
| Option-18 CAD/CAM | Δ | |
| Option-19 3D Arc Interpolation | ||
| Option-20 Pick and Place (All in one) | ||
| Option-21 Four Axis Robot | ||
| Option-22 Five Axis Robot | ||
| Option-23 Six Axis Robot | ||
| Option-24 Gantry Robot | Δ | |
| Option-25 Advanced Look-Ahead | ||
| Option-26 Smooth Tool Center Point(STCP) | ||
| Option-27 Multiple mechanisms for five-axis | ||
| Option-28 The 2nd coordinate supports feature coordinate system | ||
| Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP) | ||
| Option-31 High Speed Chamfering Contour Control | ||
| Option-32 ROT Servo Turret | ||
| Option-34 Wood Software | ||
| Option-35 3D Laser Scanning | ||
| Option-36 Wood Built-In CAM Function | ||
O Chức năng chuẩn
△ Chức năng tùy chọn
– Chức năng không có sẵn
Các tùy chọn:
| Model | Item | 6GB-G | 6GA-E | 21GA-E | 7GA | 22GA |
|---|---|---|---|---|---|---|
| Axis control | Standard. Axis | 4 | 4 | 6 | 4 | 6 |
| Max. Axis (Optional) | – | 6 | 18 | 6 | 18 | |
| Max. Spindle | 2 | 6 | 6 | 6 | 10 | |
| Axis group + PLC axis group | 1 | 2 | 4 | 2 | 4 | |
| Max. Simultaneous Axis Control | Single axis group | 4 | 4 | 4 | 4 | 4 |
| Hardware | Servo control | Pulse | ECAT/RTEX/M3 | ECAT/RTEX/M3 | ECAT/RTEX/M3 | ECAT/RTEX/M3 |
| Standard I/O | 32/32 | 32/32 | 32/32 | 64/64 (RIO) | 64/64 (RIO) | |
| Optional I/O | – | 96/96 | 96/96 | 128/128 | 128/128 | |
| DA | 2 | 2 | 2 | – | – | |
| Monitor (Inch) | 8″ | 8″ | 10.4″ | 8″ | 10.4″ | |
| DiskC | Flash 256MB | 4GB | 4GB | 4GB | 4GB | |
| DiskA | Flash 256MB | 4GB | 4GB | 4GB | 4GB | |
| Front interface | CF Card | – | – | – | – | – |
| USB | 2 | 2 | 2 | 2 | 2 | |
| Rear interface | RJ-45 | O | O | O | O | O |
| VGA | – | – | – | – | – | |
| RS-232 | – | – | – | – | – | |
| RS-422 | – | – | – | – | – | |
| RS-485 | O | O | O | O | O | |
| USB | – | – | – | – | – | |
| PS/2 | – | – | – | – | – | |
| KB | O | O | O | O | O | |
| HK | O | O | O | O | O | |
| 5V | O | O | O | O | ||
| SRI | – | O | O | O | O | |
| Normal/HPCC | BPT about 200(CE) | 1stCoord: 600/600 2ndCoord: 600/600 After opening OP31: 1stCoord: 1200/1200 2ndCoord: 1000/1000 | 1stCoord: 4000/4000 2~4Coord: 1000/1000 | |||
| Standard features | 1. G5.1 2. Simultaneous tapping 3. Fast transmission and fast attack 4. Tapping and rapid retraction 5. Multi-spindle simultaneous tapping 6. Axis exchange function 7. Overlapping 9. Single axis group five-axis simultaneous motion function | 2. Simultaneous tapping 3. Fast transmission and fast attack 4. Tapping and rapid retraction 6. Axis exchange function 7. Overlapping 10. G120.1 multiple sets of processing conditions | 2. Simultaneous tapping 3. Fast transfer and fast attack 4. Tapping and quick retraction 6. Axis exchange function 7. Overlapping 10. G120.1 multiple sets of processing conditions 11. G81.1 Chopping | |||
| Option | Option-4 Enable Plugin Function | O | O | |||
| Option-11 High Precision Contour Control (HPCC) | O | O | ||||
| Option-12 Rotation Tool Center Point (RTCP) | ||||||
| Option-13 Feature Coordinate System | Δ | |||||
| Option-14 Parameter learning function | Δ | |||||
| Option-15 Tapping Learning | Δ | |||||
| Option-16Syntec Vision | Δ | Δ | Δ | |||
| Option-17 Commercial Vision Software | Δ | Δ | Δ | |||
| Option-18 CAD/CAM | Δ | Δ | Δ | |||
| Option-19 3D Arc Interpolation | Δ | |||||
| Option-20 Pick and Place (All in one) | Δ | Δ | ||||
| Option-21 Four Axis Robot | Δ | Δ | ||||
| Option-22 Five Axis Robot | Δ | Δ | ||||
| Option-23 Six Axis Robot | Δ | Δ | ||||
| Option-24 Gantry Robot | Δ | Δ | Δ | |||
| Option-25 Advanced Look-Ahead | Δ | |||||
| Option-26 Smooth Tool Center Point(STCP) | ||||||
| Option-27 Multiple mechanisms for five-axis | Δ | |||||
| Option-28 The 2nd coordinate supports feature coordinate system | Δ | |||||
| Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP) | ||||||
| Option-31 High Speed Chamfering Contour Control | O | O | ||||
| Option-32 ROT Servo Turret | Δ | Δ | ||||
| Option-34 Wood Software | Δ | |||||
| Option-35 3D Laser Scanning | ||||||
| Option-36 Wood Built-In CAM Function |
Click here để tìm hiểu thêm về các tùy chọn của bộ điều khiển Syntec
